THORLABS PM320E, Руководство по эксплуатации

Страница: 9 / 70

© 2016 Thorlabs GmbH
2 Getting Started
7
2 Getting Started
2.1 Parts List
Inspect the shipping container for damage.
If the shipping container seems to be damaged, keep it until you have inspected the contents
and you have inspected the PM320E mechanically and electrically.
Verify that you have received the following items within the package:
1. 1 PM320E
2. 1 Power cord, connector according to ordering country
3. 2 Replacement mains fuses
4. 1 USB cable
5. 1 Operation manual
6. 1 CD "Applications and Driver"
2.2 Preparation
Attention
Prior to switching on your PM320E please check if the line voltage setting (see voltage
selector at the rear panel) corresponds to your mains voltage and make sure the correct
fuses are inserted!
Therefore please see sections Line Voltage Setting and Exchange Mains Fuses .
Turn the unit on by pressing the power switch.
After switching on the unit, the graphics display will show the device status and then jump to the
dual channel screen.
The PM320E is immediately ready to use after turning on. The rated accuracy is reached,
however, after a warming-up time of approx. 10 minutes.
If required, connect the chassis ground via the banana connector jack to ground potential of the
external optical setup.