THORLABS PM320E, Руководство по эксплуатации

Страница: 15 / 70

© 2016 Thorlabs GmbH
3 Operating Instruction
13
3.1.3 Readout Configuration
The main display can be configured in terms of measurement units; further mathematical
functions between the two channels can be configured. To configure the main display go to the
<CHx Setup> and chose the ‘Main Display’ menu.
The sub display that is visible as small read out value in the single channel screen can be
configured in the <CHx Setup> and the ‘Sub Display’ menu. For this display the power value
can be set in linear (W) and logarithmic (dBm) mode.
The following read out displays can be selected, the channel headers show the information of
the current display:
Sensor Main Display (CH 1, CH2) Sub Display (CH1, CH 2)
Photodiode Power [W]
Power [dBm]
Delta Power [W]
Delta Power [dB]
Ratio CH1/CH2, CH2/CH1 [dB]
Power Difference:
CH1-CH2, CH2-CH1 [W] Power [W]
Power [dBm]
Thermal Power [W]
Power [dBm]
Delta Power [W]
Delta Power [dB]
Ratio CH1/CH2, CH2/CH1 [dB]
Power Difference:
CH1-CH2, CH2-CH1 [W] Power [W]
Power [dBm]
Pyroelectric Energy [J]
Repetition Rate [Hz]
Average Power [W]
Power Density [W/cm²]
Energy Density [W/cm²] Energy [J]
Repetition Rate [Hz]
PD Inputs Current [A]
Power [W]
Power [dBm]
Delta Power [W]
Delta Power [dB]
Ratio CH1/CH2, CH2/CH1 [dB]
Power Difference:
CH1-CH2, CH2-CH1 [W] Current [A]
Power [W]
Power [dBm]
TH Adapter Voltage [V]
Power [W]
Power [dBm]
Delta Power [W]
Delta Power [dB]
Ratio CH1/CH2, CH2/CH1 [dB]
Power Difference:
CH1-CH2, CH2-CH1 [W] Voltage [V]
Power [W]
Power [dBm]