THORLABS LPS710/M Скачать руководство пользователя страница 59

Страница: 59 / 70

Appendix D Piezo Control Method Summary

The 'Piezo' ActiveX Control provides the functionality required for a client application

to control one or more of the APT series of piezo controller units. This range of

controllers covers both open and closed loop piezo control in a variety of formats

including compact Cube type controllers, benchtop units and 19" rack based modular

drivers.
To specify the particular controller being addressed, every unit is factory programmed

with a unique 8-digit serial number. This serial number is key to the operation of the

APT Server software and is used by the Server to enumerate and communicate

independently with multiple hardware units connected on the same USB bus. The

serial number must be specified using the HWSerialNum property before an ActiveX

control instance can communicate with the hardware unit. This can be done at design

time or at run time. Note that the appearance of the ActiveX Control GUI (graphical

user interface) will change to the required format when the serial number has been

entered.
The Methods and Properties of the Piezo ActiveX Control can be used to perform

activities such as selecting output voltages, reading the strain gauge position

feedback, operating open and closed loop modes and enabling force sensing mode.

A brief summary of the methods and propertys applicable to the PPC001 unit is given

below, for more detailed information and individual parameter descriptiond please see

the on-line help file supplied with the APT server.

Methods

DeleteParamSet

Deletes stored settings for specific controller.

DisableHWChannel

Disables the drive output.

DoEvents

Allows client application to process other activity.

EnableEventDlg

Enables or disables the event dialog box.

EnableHWChannel

Enables the drive output.

GetControlMode

Gets the loop operating mode (open/closed).

GetForceSenseParams

Gets the force sensing mode parameters.

GetJogStepSize

Gets the jogging step size.

GetMaxTravel

Gets the maximum travel of a strain gauge equipped

piezo actuator

GetMaxOPVoltage

Gets the value for the maximum output in the range

0 to 150 V.

GetOutputLUTParams

Gets the output voltage waveform (LUT) operating

parameters.

Содержание LPS710/M







































































Результаты поиска

Содержание LPS710/M

Отзывы:

Бренды по названию

Популярные бренды

THORLABS LPS710/M, Руководство пользователя

Результаты поиска

Содержание LPS710/M

Отзывы:

Бренды по названию

Популярные бренды