28
HA0378T Rev C Feb 2019
Chapter 4
4.6 Operating the Piezo Stage
The piezo stage can be manually positioned in three ways: by entering a voltage/
position, by using the ‘Output’ potentiometer or by clicking the ‘Jog’ buttons.
4.6.1 Entering the Piezo Position (Closed Loop)
1) Click the ‘Closed Loop’ button (on the GUI or on the front panel).
2) Click the ‘Position’ button.
3) Click the main display. to view the posiition pop up window.
Fig. 4.2 Position Popup Window
4) Enter 200 into the pop up window
5) Click ‘OK’. Notice that the position display counts up to 200.00 to indicate a move
to a position 200µm from the Zero datum.
Note
The piezo position can be entered only when operating in ‘Closed Loop’
mode.