THORLABS ITC8 Series, Руководство по эксплуатации

Страница: 35 / 84

Functions in the channel menu 29
_________________________________________________________________________________
_____________________________________________________________________________________________________
© 2010 Thorlabs
To change the set temperature use the softkey (T
S
) .
CH1 122.3mA +30.0°C
CH2
CH3
TUNE: I
LD
T
S
Press to end the procedure.
NOTE
If the TEC current is switched ON, the actual temperature is displayed. In
this case the set temperature can still be changed but is not displayed.
2.2 Functions in the channel menu
The channel menu is reached from the main menu by pressing the key .
Hit again or to return to the main menu.
2.2.1 Display
In the channel menu all parameters of the selected module are shown:
channel no. cursor operating parameters
CH1 I
LD
= 44.000mA
CC off P
LD
=0.70000mW
TH off T
A
= + 22.60°C
CHANGE
operating mode, laser on/off status field, TEC on/off