THORLABS ITC8 Series, Руководство по эксплуатации

Страница: 56 / 84

50 Commands
_________________________________________________________________________________
______________________________________________________________________________________________________
© 2010 Thorlabs
3.2.12 Reading the laser diode hardware-limit (LIMCP)
Reading:
":LIMCP:ACT?" Reads the actual hardware-limit
[:LIMCP:ACT <NR3><LF>]
":LIMCP:MIN_R?" Reads Imax – ADC = 0000
[:LIMCP:MIN_R <NR3><LF>]
":LIMCP:MAX_R?" Reads Imax – ADC = FFFF
[:LIMCP:MAX_R <NR3><LF>]
(Refer to Chapter 1.5.1, "Hardware limit I
LIM
" starting on page 13)
3.2.13 Programming the TEC current software-limit (LIMT)
Programming:
":LIMT:SET <NR3>" Programs the TEC software current -limit
Reading:
":LIMT:SET?" Reads the TEC current software-limit
[:LIMT:SET <NR3><LF>]
":LIMT:MIN?"
Reads the minimum allowed TEC software current limit
[:LIMT:MIN <NR3><LF>]
":LIMT:MAX?"
Reads the maximum allowed TEC software current limit
[:LIMT:MAX <NR3><LF>]
":LIMT:MIN_W?"
Reads I
TE LIM
- ADC = 0000
[:LIMT:MIN_W <NR3><LF>]
":LIMT:MAX_W?" Reads I
TE LIM
- ADC = FFFF
[:LIMT:MAX_W <NR3><LF>]
(Refer to Chapter 1.5.2, "Software limits I
MAX
and I
TE LIM
" on page 14)
3.2.14 Selecting the mode of operation (MODE)
Programming:
":MODE CC"
Constant current mode
":MODE CP" Constant power mode
Reading:
":MODE?" Reads the mode of operation
[:MODE CC<LF>]
[:MODE CP<LF>]