THORLABS ITC8 Series, Руководство по эксплуатации

Страница: 57 / 84

Commands 51
_________________________________________________________________________________
_____________________________________________________________________________________________________
© 2010 Thorlabs
3.2.15 Selecting the photo diode polarity (PDPOL)
Programming:
":PDPOL AG" Selects anode on ground
":PDPOL CG"
Selects cathode on ground
Reading:
":PDPOL?" Reads the monitor diode polarity
[:PDPOL AG<LF>]
[:PDPOL CG<LF>]
3.2.16 Programming the optical power (POPT)
Programming:
":POPT:SET <NR3>" Programs the optical power
Reading:
":POPT:SET?" Reads the set optical power
[:POPT:SET <NR3><LF>]
":POPT:ACT?" Reads the actual optical power
[:POPT:ACT <NR3><LF>]
":POPT:MIN?" Reads the minimum allowed set optical power
[:POPT:MIN <NR3><LF>]
":POPT:MAX?"
Reads the maximum allowed set optical power
[:POPT:MAX <NR3><LF>]
":POPT:MIN_W?"
Reads the optical power for P
LD
– DAC = 0000
[:POPT:MIN_W <NR3><LF>]
":POPT:MAX_W?" Reads the optical power for P
LD
– DAC = FFFF
[:POPT:MAX_W <NR3><LF>]
":POPT:MIN_R?" Reads the optical power for P
LD
–ADC = 0000
[:POPT:MIN_R <NR3><LF>]
":POPT:MAX_R?" Reads the optical power for P
LD
–ADC = FFFF
[:POPT:MAX_R <NR3><LF>]