THORLABS ITC8 Series, Руководство по эксплуатации

Страница: 63 / 84

Commands 57
_________________________________________________________________________________
_____________________________________________________________________________________________________
© 2010 Thorlabs
3.2.26 Programming the bias voltage (VBIAS)
Programming:
":VBIAS:SET <NR3>" Programs the bias voltage
":VBIAS:START <NR3>" Programs the bias start voltage for “ELCH”
":VBIAS:STOP <NR3>" Programs the bias stop voltage for “ELCH”
Reading:
":VBIAS:SET?" Reads the bias voltage
[:VBIAS:SET <NR3><LF>]
":VBIAS:MIN?" Reads the minimum allowed bias voltage
[:VBIAS:MIN <NR3><LF>]
":VBIAS:MAX?" Reads the maximum allowed bias voltage
[:VBIAS:MAX <NR3><LF>]
":VBIAS:MIN_W?"
Reads U
BIAS
- DAC = 0000
[:VBIAS:MIN_W <NR3><LF>]
":VBIAS:MAX_W?"
Reads U
BIAS
- DAC = FFFF
[:VBIAS:MAX_W <NR3><LF>]
":VBIAS:START?" Reads the bias start voltage for “ELCH”
[:VBIAS:START <NR3><LF>]
":VBIAS:STOP?" Reads the bias stop voltage for “ELCH”
[:VBIAS:STOP <NR3><LF>]