THOMSON ROC8507 Скачать руководство пользователя страница 5

Страница: 5 / 48

This universal remote control (8 in 1) is compatible with most television sets, DVD players, video cassette recorders,
DVB-T receivers, amplifi ers and Hi-Fi and Home Cinema systems, as well as with most digital decoders such as
satellite or cable receivers, ADSL decoders, etc. These digital decoders are grouped together under the name STB
(Set Top Box).
This remote control was factory-programmed in order to allow you to use it immediately with most devices with
Thomson group brand names. We suggest that you thus try it out before programming it using one of the methods
in this users manual. But fi rst of all, you must install 2 batteries (AAA - LR03) in it.
Keep this manual and its related documents so that you can refer to them for new programming operations
whenever you acquire new devices.

The LCD display

always shows the active mode of the remote control (TV, DVD,

etc.) and the current time. These indications will be displayed as long as the
batteries are not worn down.

Navigation keys

The navigation keys serve to scan and then select the functions on the LCD
display.

The

EXIT

key serves to return to normal use of the remote control. In some cases,

this return to normal is automatic.

The keys and their functions

- On/Standby, or Standby only, depending on the

device.

2 Mode keys

– Select the device to be controlled (

TV,

DVD

, etc.).

3 SETUP

– Programing the remote control.

Selecting T V channels with one or two digits

(-/-)

, Selecting a plug/external feed (

choosing a macro-command (

1/T V, 2/DVD,

3/STB

5 MENU

OK, EXIT

– Access to

the Navigation/Selection, Confi rmation menus
Exit from the menus.

L1, L2, L3, L4

– Additional programmable keys

(learning function).

Activating and using Teletext (Videotext, Fastext,
etc.).

Playing a disc or cassette.

Volume control, Mute (

), Change TV channel/

station, Display in 16 : 9.

Turns on the

MACRO

mode (sequence of automatic

commands).

LCD display

remote control mode (

TV, DVD

, etc.),

day, date, (press

SETUP

hour, date or code of the device controlled, (press

SETUP

or the mode key),

shows transmission to the device,

SET

is displayed when the remote control is in

programming mode.

Sleep timer is programmed

is displayed when a Timer is programmed

Time format AM (morning) / PM (afternoon) when
the time is set in the 12Hr mode. Not shown when in
the 24Hr mode.

Note

: The mode keys are pre-set for the devices indicated

by their icons (

for a TV set,

DVD

for a DVD player, etc.).

Your remote control allows you to assign to each key a
diff erent mode from the one indicated on it for all of the
mode keys except the

key (e.g., DVD-HDD recorder to

the

VCR

key, etc).

Start set-up

The fi rst time you install the batteries, instructions will
appear in English (

SET USING...KEY

). Press

to display

LANGUAGE? ENGLISH

then select one of the 7 languages

using the

keys and press

CONFIRM xxxx

(depending on the language selected) is displayed Press

OK >

SUCCESS

is briefl y displayed, then

CODE SET UP

When

CODE SET UP

is displayed, you will have a few

seconds to set up the codes for the devices you would
like to control with your ROC 8507. Refer to stage 3 of
the A, B, C, D programming methods to continue the
programming procedure.

Note

TIMEOUT

appears when you have exceeded the

allotted time for an operation.

Programming the remote control

The

SETUP

key is used for programming or to access

the secondary functions such as, for example,
adjusting brightness or contrast on certain TV sets, etc.
Programming is required if you wish to control devices of
other brands than Thomson.

Access to the secondary functions

Briefl y press the

SETUP

key once. The date will show

on the screen. Then press the desired secondary
function key. The remote control will exit this mode
30 seconds after a key is last pressed or if you press the

EXIT

key.

Programming the remote control

Hold down the

SETUP

key until

CODE SETUP

appears

on the display. If you see

SET

on the right side of

the display, this confirms that the remote control
is being programmed. Pressing

SETUP

repeatedly

then allows you to scroll through the settings
options in the order given below. You may exit the
programming mode by pressing the

EXIT

key or by

navigating up to the exit option and confirming by
pressing

CODE SETUP

- Allows you to access one of the

4 programming modes using the

key.

You may thus choose to scroll through the list of codes,
enter a code, launch a code search or enter a code based
on the brand of the equipment to be controlled (the
code booklet comes separately).

SYSTEM SETUP

- Allows you to access settings for time,

date, volume, etc. using the

key.

TIMER SETUP

- Allows you to access the Timer settings

using the

key.

LEARN SETUP

- Allows you to access the learning function

of the keys using the

key.

MACRO SETUP

- Consists of defi ning the sequences of

automatic commands. Each sequence is made up of
commands involving several keys (10

keys maximum).

HOME CINEMA SETUP

- The Home Cinema mode is

considered to be a «virtual mode» that uses up to 5
groups of keys per mode. By means of this function,
users can see all of the keys and devices they most often
use regrouped under a single «Virtual mode». (See Home
Cinema fucntion, Page 6).

EXIT SETUP

- Allows you to exit the programming mode

using the

key.

Note 1

: After 15 seconds of inactivity, the remote control

exits the programming mode.

Note 2

: If the remote control is searching for a code or

awaiting information,

PLEASE WAIT

is displayed.