THOMSON DD10, Руководство по установке

Страница: 155 / 179

Diamond digital 9. Port Protocols GVG-200 Emulation
146
#
GVG-200 KEY Diamond digital
1BH
1CH
1DH
1EH
1FH
20H
21H
22H
23H
24H
25H
26H
27H
28H
29H
2AH
2BH
2CH
2DH
2EH
2FH
30H
31H
32H
33H
34H
35H
36H
37H
4AH
5EH
5FH
BOX MASK INVERT
(Keyer 1/DSK)
KEY CUT (Keyer 2)
REV (Wipe)
MASK (Keyer 2)
KEY INVERT (Keyer 2)
SHADOW (Keyer 2)
MATTE Fill (Keyer 2)
KEY BUS FILL (Keyer 2)
KEY BUS SOURCE (Keyer 2)
AUTO SELECT SOURCE (Keyer 2)
LUM KEY (Keyer 2)
LINEAR KEY
CHROMA KEY (Keyer 2)
PRESET PTN (Keyer 2)
BOX mask source (Keyer 2)
ME1 mask source (Keyer 2)
ME2 WIPE mask source (Keyer 2)
EXT mask source (Keyer 2)
FORCED FOREGROUND
(Keyer 2)
BOX MASK INVERT (Keyer 1/DSK)
ASPECT ON (Wipe)
BORDER ON (Wipe)
SOFT ON (Wipe)
AUTO CENTER (Positioner)
POS ON (Positioner)
SPLIT WIPE
FLIPFLOP WIPE
EXT mask invert
WIPE mask invert
CUT
NORMAL (Wipe)
REV (Wipe)
Switches mask invert on/off.
Mask type is not changed, painted masks are retained.
(Also external masks are inverted).
Sets key 2 level to 100% resp. 0%
Sets wipe mode to reverse/normal.
Switches mask on/off on key 2.
Invert key 2 on/off.
Drop shadow on/off on keyer 2.
Selects matte as a fill signal of key 2/5.
Selects key bus for fill signals.
Recall of fill signal source which has been selected before
a MATTE FILL command.
Works only if a crosspoint has been selected via the edit
interface.
Selects key bus for key source signals on keyer 2.
Activates/deactivates coupled mode for key 2/5.
Key mode: luminance key 2.
Key mode: linear key 2.
Key mode: chroma key 2
An appropriate key source must be selected before is-
sueing this command.
When WIPE is active, PTN-Size will be ignored.
Switches mask mode to rectangle and selects mask as a
key source (note 1).
Painted mask is lost.
Not available.
Not available.
Sets mask type to external mask 2
Key is set to forced foreground mode.
If EX=0, DSK 2 is switched to this mode.
Switches mask invert on/off.
Mask type is not changed, painted masks are retained.
(Also external masks are inverted).
Switches ratio on/off.
Switches border on/off.
Switches normal softness on/off.
Resets positioner to center of screen.
Write off has no effect.
Positioner on/off.
Not available.
Sets wipe direction to N/R.
Switches mask invert on/off.
(Also internal masks are inverted).
Not available.
Same effect as if the CUT key is pressed on the panel.
Write function off has no effect.
Write function on: switches wipe direction REV and N/R
off.
Write function off: switches wipe direction REV and N/R
on/off.
*