THOMSON DD10, Руководство по установке

Страница: 154 / 179

9. Port Protocols GVG-200 Emulation Diamond digital
145
9.3 KEY (BUTTON) COMMANDS
Key (button) command (C6 = on, C7 = off)
#
GVG-200 KEY Diamond digital
00H
01H
02H
03H
04H
05H
06H
07H
08H
09H
0AH
0BH
0CH
0DH
0EH
0FH
10H
11H
12H
13H
14H
15H
16H
17H
18H
19H
1AH
Auto trans
Preset black mix/dsk out
ME : trans pvw
DSK : black auto trans
WIPE or BLACK CUT
KEY 1 over
KEY 2 over
Key cut, Keyer 1
Mask Keyer 1 or DSK
Key invert (Keyer/DSK)
Shadow, (Keyer 1/DSK)
MATTE Fill, (Keyer 1/DSK)
KEY BUS FILL, (Keyer 1/DSK)
KEY BUS SOURCE (Keyer 1/DSK)
AUTO SELECT SOURCE
(Keyer 1/DSK)
LUM KEY, (Keyer 1/DSK)
MIX
LINEAR KEY
CHROMA KEY, (Keyer 1)
PRESET PTN (Keyer 1)
BOX mask source (Keyer 1/DSK)
ME 1 WIPE mask source (Keyer 1)
MIX
ME 2 WIPE mask source (Keyer 1)
WIPE
CUT
EXT mask source (Keyer 1/DSK)
FORCED FOREGROUND
(Keyer 1/DSK)
Start/stop auto transition
DSK : Cut
ME
: black preset (mix and wipe)
ME : transition (on/off)
DSK : start/stop FTB auto transition
FTB : Cut
ME
: write on: WIPE is selected
Write function on: Key Change 2-1
Write function off: Key Change 1-2
Write function on: Key Change 1-2
Write function off: Key Change 2-1
Write function on: Key 1, 100 %
Write function off: Key 1, 0 %
Mask on/off key 1, key 4 or DSK
Key invert (keyer 1/DSK)
Border key: drop shadow on/off
Selects matte as fill signal of key
Selects key bus for fill signals.
Recall of fill signal source which has been selected be-
fore a MATTE FILL command.
Works only if a crosspoint has been selected via edit
interface.
Selects key bus for key source signals.
Activates/deactivates coupled mode.
Key mode: luminance key
Selects transition type mix.
Key mode: linear key
Key mode: chroma key
An appropriate key source must be selected before is-
sueing this command.
Sets transition mode to mix and selects wipe generator
as a key source. If a wipe transition has been stopped
half way, switching to mix mode will fail and the wipe
generator cannot be selected as a key source.
Switches mask mode to rectangle and selects mask as
a key source.
Painted mask is lost.
Not available.
Sets transition type to mix, write off has no effect.
Not available.
Sets transition type to wipe, write off has no effect.
Same effect as if the CUT key is pressed on the panel.
Write function off has no effect.
Sets mask type to external mask.
Sets key to forced foreground mode.