manualshive.com logo in svg

THOMSON DD10, Руководство по установке

Поделиться
Скачать
THOMSON DD10 Скачать руководство пользователя страница 141

8. DVE and Editors

DD5, DD10, DD20, DD30

132

8.3.6

GVG DPM 700

For the GVG DPM-700, the switcher provides two protocols for different purposes.
The protocols are:

1. Selection and control of DVE effects: protocol DVE DPM
2. Control of aux buses by the DPN: protocol DVE DPM-AUX

Tests showed that the DPM does not enable the operator to operate both functiona-
lities at the same time without disturbances.

8.3.6.1

Selection and controls of effects

Standard cable RS-422

Serial port:

Port1 or port2 or port3

Protocol in switcher setup:

DVE DPM

Port:

ACCESSORY port

Protocol:

Model 100 protocol
On all other ports, select SONY protocol 

Enables:

Editor has to be enabled with control by the
switcher.

The effects have to be scaled to 30 seconds.

Effects selection is possible from the switcher.
Effects control is possible with the fader lever.
Effects control is possible by means of Auto Transition.

With manual effects control from the switcher it may happen that contributions sto-
red in the DVE effect (e.g. Freeze on/off, E-MEM-Recall etc.) are not reproduced
(the associated key frame is not exactly selected).
When on the other DPM ports, the SONY protocol is not selected, an unobjectiona-
ble functioning cannot be ensured.
The tests are made with the DPM-700 Software Panel/Comm/Trans Version 2.4A.

Connection cable:

DD switcher setup
and installation:

DVE setups and
installations:

Note when
creating DVE
effects:

Possible
functions:

Special features:

Содержание DD10




















































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды