ThermoFisher Scientific QuantStudio 1, Инструкция по установке, эксплуатации и обслуживанию

Страница: 45 / 110

Scan a barcode using the optional barcode scanner
The instrument is compatible with an optional Handheld Barcode Scanner (Cat. No. 4488442 ,
purchased separately). The barcode scanner reads Code 128 (alphanumeric), which supports
128 ASCII character barcodes.
1.
Click the Barcode field.
2.
Hold the scanner 20–30 cm away from a plate or container label and aim at the center of the
barcode, then press the trigger.
3.
Slowly move the scanning beam across the barcode until the scanner emits a high-pitched tone.
When the scanner scans a barcode, it automatically transmits the following information:
• Transmits the alphanumeric equivalent of the barcode to the barcode field.
• Transmits other reagent information (Lot #, Part #, Expiration Date, etc.)
For more information about the hand-held barcode scanner, see the user documentation provided with
the barcode scanner.
Edit the run method
Access a template (EDT file). For more information, see the following sections.
• “Create and run an experiment from a template”
on page 42 .
• “Run an experiment from a saved file” on page 42 .
• “Repeat the last instrument run”
on page 43 .
For an overview of the method as it is graphically represented on the touchscreen, see “Method
elements”
on page 46 .
1.
In the Method screen, touch Edit .
2.
Touch a field, enter changes, then touch Enter .
Note:
Touch–drag to quickly increase or decrease a step temperature.
3.
Touch “Manage steps, stages, melt curves, and data collection points” to add or remove a
step, stage, melt curve, or data collection point.
Note:
The Manage Steps screen also provides access to configuring Ramp Rates and Add
Pause settings. See “Configure ramp rates and pause settings” on page 48 .
Chapter 4
Create and run experiments on the instrument
Edit an experiment before starting a run
4
QuantStudio ™ 1 Plus Real-Time PCR System Installation, Use, and Maintenance Guide
45