Thermo Scientific Heracell Vios 160i CR, Руководство по эксплуатации

Страница: 116 / 216

6
Handling and Control
User Configuration
6-30
Heracell Vios 160i / 250i CR
Thermo Scientific
The settings can be made within the value range of 10 seconds to 3600 seconds.
1. To increase the value:
• Press the + key.
2. To reduce the value:
• Press the - key.
3. The value change appears in the display. The New message indicates that the selection has been
changed, but not saved yet.
4. To accept and save the change:
• Press the Enter key.
• The system returns to the Event logging menu.
Displaying the Error Table
The error table lists the errors detected by the device-integral monitoring system in descending
chronological order. The most recently detected error is listed at the top position of 22 possible entries.
An entry consists of the control loop in which the error occurred, the date, the time, and an error
description. The error table can be displayed but not edited. If the event display consists of two pages,
the user can browse through the list. The status indicator
001/002 or 002/002 indicates which page of
the two pages is currently being displayed.
Displaying the Error Table
1. Press the Menu key.
2. Select the menu command Event logging.
• The selection dialog shown in Figure 6-31 is displayed.
3. Select the menu command Event display.
• The list shown in Figure 6-34 appears on the display.
Figure 6-34. Displaying the Error Table
Note Event logger interval time:

The logging cycle time does not affect the entries of the error table.