Thermo Scientific Dionex UltiMate 3000 Series, Руководство по эксплуатации

Страница: 30 / 270

UltiMate 3000 Series:
NCS-3500RS and NCP-3200RS
Page 22 Operating Instructions
2.4 Front Panel Elements
Fig. 1: Front panel view (here NCS-3500RS)
No. Element Function
1 Standby button Switches the module to Standby mode (the LED is lighted).
To cancel Standby mode and resume operation, press the Standby button
again (the LED is not lighted).
Notes:
To allow the module to change the mode, press and hold the Standby
button for at least one second.
If you switch a module to which a SRD-3x00 Solvent Rack is connected
to the Standby mode, the Solvent Rack, too, will be set to Standby mode.
2 Lever Moves the valve actuators or, if already installed, the column switching
valves toward the front ( → page 78).
3 Display Shows information about the pump (upper display) and about the column
compartment (lower display):
- Status screen ( → page 85)
- Functions and menus ( → pages 94 and 96)
In addition, the following information appears on the pump display:
- General information upon power-up of the module (
→ page 85)
- Messages ( → page 147)
3
3
4
4
1
2