Thermo Scientific Dionex UltiMate 3000 Series, Руководство по эксплуатации

Страница: 101 / 270

UltiMate 3000 Series:
NCS-3500RS and NCP-3200RS
Operating Instructions Page 93
2. Change the program settings as needed.
The easiest way is to edit a program is to do this in the Device Views ( → Fig. 47). Click
a device icon and change the settings on the device pages. Editing the program in the
Device Views ensures correct command syntax.
If you cannot edit a certain parameter in the Device View, click
Commands
to open the
Commands View. The Commands view shows the entire program, listing the control
commands in chronological order. For more information, see the Chromeleon Help .
3. To start the program, follow the steps in the next section.
To start a program
Program for sample analysis
1. Create a sample list (sequence). A sequence must include the program and a method
for evaluating the sample data (for example, for peak identification, area
determination, and amount determination).
2. Assign the program and method to each sample on the list.
3. Add the sequence to the batch and start the batch.
For information about each of these steps, see the Chromeleon Help .
Other programs
Add the program to the batch and start the batch.