Thermo Scientific Dionex UltiMate 3000 Series, Руководство по эксплуатации

Страница: 55 / 270

UltiMate 3000 Series:
NCS-3500RS and NCP-3200RS
Operating Instructions Page 47
• Download
Click the Download button to transfer the firmware version available for the module in
Chromeleon to the module. The button appears dimmed if the virtual mode is enabled.
The module is shipped with the most recent firmware version. If a firmware update is
ever required, follow the steps in section 7.14 ( → page 217).
Pumps Page (NCS-3500RS) or Devices Page (NCP-3200RS)
Displays the names used to identify the pump module and pumps in Chromeleon, and sets
whether the degasser of a SRD-3x00 Solvent Rack can be operated via the pump module.
Fig. 15: Pumps page
• Main Device
♦ Name (default name PumpModule )
Displays the name used to identify the pump module in the installation environment
and in the Chromeleon client. Under PumpModule , the following commands and
properties are displayed, for example, in the Commands dialog box (
→
page 89):
♦ General properties and commands related to the entire pump module, such as
the commands and properties for the seal wash system, leak detection, or the
degasser in a SRD-3x00 Solvent Rack that is connected to the module.
♦ Specific groups of properties and commands for the pumps of the pump
module. These commands and properties appear under the pump name
( → Loading Pump Device and NC Pump Device further down in this section).
To control the pump module with the existing control panels, accept the default
name. If you enter a different name, you may have to re-link the controls on the
control panels and edit the device name of the pump module in the program files.