Theralux POOL+ MANAGER A2 APP, Инструкция по эксплуатации

Страница: 6 / 29

POOL+ MANAGER App A2 - User Manual v1.0 6
PUMP
If at any time the PUMP button is pressed the pump is switched on and the following
will be displayed:
3 MINS BACKWASH
ENDS IN xx:xx:xx
This function is used for a system back wash, pool vacuuming, manually running the
system for a set amount of time, running the filtration system after adding chemicals,
etc. It can also be used to stop the pump from running (if maintenance is required) for
a set amount of time.
Use the Up/Down buttons to increase or decrease the amount of time that the pump
will run, or not run. The countdown timer lets you know how much time is left until the
manual function ends.
The timer amounts after the
3 minute backwash are:
PUMP ON: 30 MINS,
PUMP ON: 1HR,
PUMP ON: 2HR,
PUMP ON: 3HR,
PUMP ON: 5HR,
PUMP ON: 9HR,
PUMP ON: 10HR,
PUMP ON: 15HR,
PUMP ON: 20HR, and
PUMP ON: 24HR. The timer amounts to stop the pump
are displayed as follows:
HOURS OFF: 01HR,
HOURS OFF: 02HR,
HOURS OFF: 03HR,
HOURS OFF: 05HR,
HOURS OFF: 09HR,
HOURS OFF: 10HR,
HOURS OFF: 15HR,
HOURS OFF: 20HR, and
HOURS OFF: 24HR.
At any time during the count down, if you press the ENTER button, the timer will reset
to the selected time, and start again.
During the count down, if you press the PUMP button again, the controller will return
to automatic operation.
NOTE
It is advisable to go into Installer Setup first and enter all equipment that will be utilised/allocated in the
Menu functions.