Theralux POOL+ MANAGER A2 APP, Инструкция по эксплуатации

Страница: 29 / 29

POOL+ MANAGER App A2 - User Manual v1.0 29
NOTES:
1. If any of the menu items are left unattended for 3 minutes the menu will time out and automatically save
all settings and return to automatic operation.
2. If a fault is detected the controller will display what the fault is.
3. Should power be interrupted for any reason, the controller will resume normal operation when power is
restored. All information will have been kept for up to 10 days.
4. If the controller has stopped the pump and is displaying a higher temperature than expected it may be
caused by a pump which is failing to prime. Check the pump and if necessary, prime the pump as per the
pump manufacturers’ instructions. Then reset the controller by turning it off/on.
5. Maximum combined rated output load for the 240V socket(s) is 9.98 Amps / 2395 Watts.
6. Degree of protection against moisture: IP33.
Store pool chemicals at least 3 metres safely away from all pool equipment.
WARRANTY

This range of product is covered by a limited 3 year warranty against component failure or faulty
workmanship from the date of installation.

Faulty units should be returned in the first instance to the dealer from which the unit was
purchased. (Return to Base)

Damage to the unit due to misuse, power surges, corrosion from pool chemical fumes, lightning
strikes and or installation that is not in accordance with the manufacturer’s instruction may void
the warranty.

Warranty does not include on-site labour or travel costs to or from installation site.
If the power cord is damaged, do not use the controller. Return the unit to the supplier for repair.
CUSTOMER RECORD
(To be retained by the customer)
DEALER/INSTALLER NAME
SERIAL NUMBER
DATE INSTALLED
International Quadratics Pty Ltd
Divison: Theralux
www.theralux.com.au
12 Gatwood Close, Padstow NSW 2211 Australia
T: 1300 131 788
E: sales@Interquad.com.au