Theralux POOL+ MANAGER A2 APP, Инструкция по эксплуатации

Страница: 5 / 29

POOL+ MANAGER App A2 - User Manual v1.0 5
OPERATING INSTRUCTIONS
LCD SCREEN
In Automatic (Pool) mode the LCD screen displays; the time of day, what time the current filtration cycle will
finish/start at, if more than one filtration cycle is set, then the start time of the next filtration cycle is
displayed, current pool and roof temperatures or any faults are displayed, current status of the pump
(run/inactive), Heat Demand time (if active), and whether the WIFI is active or disabled.
In Spa mode the LCD screen will display; the time of day, SPA MODE on, pool temperature or sensor fault,
Temperature – both current temperature and set temperature of the spa, pump status, and WIFI status.
LCD INDICATORS
There are arrow icons on the LCD screen that point to text on the label.
CONTROLLER BUTTONS
AUTO
Pressing the AUTO button will run the controller in automatic pool mode. If the AUTO
button is pressed while in the settings menu, the changed settings will be used but not
saved. If there is a power failure the controller will retrieve the previously saved settings.
On power–up the controller will start automatic pool operation.
BACK Pressing the BACK button will allow you to go back to previous menu options.
ENTER
Pressing the ENTER button will turn on the LCD backlight or
Pressing the ENTER button will accept the currently displayed setting option.
MENU
After pressing the MENU button, a range of options can be selected from and changed.
The selectable options in the MENU are as follows:
1) FILTER TIMES
2) TEMPERATURE SETTINGS
3) MANUAL ON
4) TIMERS
5) LIGHTS
6) INSTALLER MENU
UP & DOWN
The UP & DOWN buttons allow you to scroll through different functions and or settings
in the menus, as well as increasing or decreasing temperature settings.
SPA
The SPA button allows you to toggle between Pool and Spa modes.
Pressing the SPA button begins the process of heating the spa to the spa temperature
limit. The pool/spa valve will move to the spa and prime the pump if required. Heating
will occur to the displayed set temperature. To return to automatic pool operations
press the AUTO button or press the SPA button to return to automatic pool operations