Theralux POOL+ MANAGER A2 APP, Инструкция по эксплуатации

Страница: 22 / 29

POOL+ MANAGER App A2 - User Manual v1.0 22
6.7
PUMP
CALL
When you enter this menu option, the controller will display:
PUMP ON
CALL OFF
If you select OFF, the controller will return you to the Installer Setup menu.
If you select ON, the controller will display: (if a Multi Speed pump is installed)
PUMP CALL
SPEED X
Use the
↑
or
↓
buttons to select which pre-set speed you would like and press Enter.
More often than not, this menu option will be utilised in the case of a Heater telling
the controller that it is turning on, and the controller needs to turn the filtration pump
on. Not the controller telling the Heater to turn on.
Note: There may also be other situations where this function can be utilised. An
example of this would be if a pool has an overflow trough, wet edge, negative edge,
etc, where pool water needs to be pumped back into the main system.
This can be done by plugging a float level switch (purchased separately) into the pump
call port beneath the controller. When the float rises/drops to a set point, it will turn
the filtration pump on to start pumping water back into the pool/spa system.
There may be other situations where this feature can be utilised to turn the pump on.
6.8
WATER
FEATURE
It is under this menu option that you will be able to set what type of water feature you
have installed.
When you enter the Water Feature menu, the controller will display:
WATER FEATURE
1. NONE
The other options are:
2. PUMP
3. VALVE
Note: Options 2 and 3 will only appear if a socket or a valve has been allocated for a Water
Feature in 6.1, Appliances menu.
If neither have been allocated, then you will not be able to set a type in this menu option.
Use the
↑
or
↓
buttons to scroll through the options available and press Enter to accept
the option you wish to set.
If you select 2. PUMP, the controller will accept the option and return you to the
Installer Setup menu.
If you select 3. VALVE, the controller will then display:
WATER FEATURE
SPEED 1
You are being asked to select a filter pump speed while the system is running the
Water Feature. (If multi speed filter pump is used)
Use the
↑
or
↓
buttons to select which pre-set speed you would like, and press Enter.
Once you have selected a pump speed, the controller will return you to the Installer
Setup menu.