Theralux POOL+ MANAGER A2 APP, Инструкция по эксплуатации

Страница: 25 / 29

POOL+ MANAGER App A2 - User Manual v1.0 25
6.10
EXPANSION
UNIT
CONTINUED
Secondary Installation.
If at a later stage you add an Expansion Unit, (whether first or second) you need to
ensure that the signal cable is connected (as per diagram on page 4). Once the signal
cable is connected, plug the Expansion Unit into a power point and turn it on.
The Master Controller will detect that the Expansion Unit is there and assign it to
either EXP:1 (if first unit) or EXP:2 (if second unit) and will be displayed as below.
Enter 6.10 Expansion Unit menu function to increase the amount of Expansion Units
that can have Appliances allocated to it. The process is detailed below.
When you first enter this menu option the controller will display whether any
expansion units are configured and which version if so. For example:
EXP:1 1.00B1
*
EXP:2 NONE
Note: A blinking dot in the top right-hand corner of the screen, indicates that auto-
configuration is in progress.
Pressing the Enter button will move you into the next option which is to choose how
many expansion boxes can have Appliances allocated to it. This is displayed as:
NUMBER EXP
UNITS 0
Use the
↑
or
↓
buttons to change the number of Expansion Units required: 0, 1, or 2.
Once the amount you require is displayed, press Enter to accept.
If none (0) is selected, the controller will return you to the Installer Setup menu and
you will be unable to allocate any Appliances beyond Sockets 1 & 2.
If 1 or 2 is selected, the controller will display a message to reset all addresses:
RESET ALL
ADDRESSES NO
If you DON’T want to reset the Expansion Unit address, press Enter and the controller
will return you to the Installer Setup menu.
Note: You will only need to reset the Expansion Unit address if you want to change Units 1 and
2 around or if an Expansion Unit is being added to a system after being installed at another
site.
If you DO want to reset the Expansion Unit address, use the
↑
or
↓
buttons to change
the NO to a YES, press the Enter button. If you press the Enter button the controller
will display:
EXP UNITS
RESET ADDRESSES. . . .
Before then displaying
EXP UNITS
RESET DONE !
Press Enter and the Following will be displayed:
SCAN FOR EXP
UNITS NOW? NO
Use the
↑
or
↓
buttons to change the NO to a YES, press the Enter button to scan for
Expansion Units. You will only need to scan for Expansion Units if you have Reset the
Expansion Units addresses.
If you select NO the controller will return you to the Installer Setup Menu.