Theralux POOL+ MANAGER A2 APP, Инструкция по эксплуатации

Страница: 10 / 29

POOL+ MANAGER App A2 - User Manual v1.0 10
4.
TIMERS
When you enter the TIMER menu, you can set a number of the allocated appliances on
a timer. The appliance has to be allocated a socket or valve to be allowed a Timer
setting. Each appliance has the choice of either; Off, 1 time, or 2 timer allocations.
**Note: Time periods for different appliances can overlap each other.**
The first available appliance to be set on a timer will be displayed as:
Socket #X
XXXXXXXXXXXX.
Press the ENTER button to be able to adjust the time setting or use the
↑
or
↓
buttons
to display the Appliance to be set.
You will see displayed:
XXXXXXXXXXX
TIME 1 ON.
Toggle the
↑
or
↓
buttons to either turn the appliance ON or OFF the timer.
If you select OFF the next allocated appliance will be shown.
If you select ON then the controller will display:
XXXXXXXXXXXXX
TIME 1 FRM XX.XX
Use the
↑
or
↓
buttons and the Enter button to allocate a start time. Once the time has
been entered, the next display will be:
XXXXXXXXXXXXX
TIME 1 TO XX.XX
Use the
↑
or
↓
buttons and the Enter button to allocate an end time. Once the time has
been entered, the next display will be:
XXXXXXXXXXXXX
TIME 2 ON/OFF
Adjust TIME 2 setting as with TIME 1.
Once the TIMER setting has been completed you can move onto the next allowable
appliance. Adjust and set as above.
Notes:

Socket type “Sanitiser” is not allowed on appliance timer, as it follows filter timer.

Socket type “Filter Timer” is not allowed on appliance timer, as it follows filter timer.

Socket type “Solar” is not allowed on appliance timer, it follows solar configuration.

Socket type “Always On” is not allowed on appliance timer.

Socket type “Blower” is not allowed on appliance timer, used only in Spa mode.

Socket type “Jet Pump” is not allowed on appliance timer, used only in Spa mode.

Valve type “Pool/Spa” is not allowed on appliance timer, used on in Pool/Spa mode.

Valve type “Solar” is not allowed on appliance timer, as it follows solar configuration.
 VF contact types are not allowed on appliance timers.
Please ensure that when you set the timers for different appliances, that the maximum
combined load DOES NOT exceed either the controllers power rating, or the power
rating of the expansion unit when the different appliances are turned on at the same
time.