Theralux POOL+ MANAGER A2 APP, Инструкция по эксплуатации

Страница: 20 / 29

POOL+ MANAGER App A2 - User Manual v1.0 20
6.5
SPA
CONTINUED
If you select ON, the controller will display:
SPA CHLORINATOR
DUTY CYCLE 10%
Use the
↑
or
↓
buttons to adjust the percentage of chlorination you would like, while
the Spa is running. The percentage is adjustable in lots of 10% from 0% to 100%. Adjust
and press Enter to accept. The controller will then move you onto the next option.
If you select OFF to Spa Chlorinator, the controller will move you onto the next option.
Once you have selected the temperatures for the Blower and/or Jet Pump, and if you
have adjusted the Chlorinator Duty Cycle, the controller will move you onto the next
option which is selecting the Spa Pump speed (if a Multi Speed pump is installed) and
will display:
SPA PUMP
SPEED X
Use the
↑
or
↓
buttons to select which pre-set speed you would like, and press Enter.
If you don’t have Spa lights allocated, the controller will display the message:
NO SPA LIGHT CONFIGURED
and will exit you to the Installer Setup menu after a period of time, or you can press
the menu button to exit.
If you have Spa Lights allocated, the controller will display:
S4: SPA LIGHT
When you press Enter you will be able to change the colour of the Spa light. This will
be the colour that the Spa light will turn onto when the controller is switched into SPA
MODE. It may be a different colour to what is set under the Timer menu.
Use the
↑
or
↓
buttons to scroll through the colours, press Enter to select.
Once you have pressed Enter to select, the controller will return you to the Installer
Setup menu.
6.6
HEAT
DEMAND
In this menu option you will be able to set the timeframe in which you would like your
heater to run.
When you enter the menu option, the controller will display:
HEAT ON
DEMAND OFF
If you select OFF, the controller will accept the selection and exit you to the Installer
Setup menu.
If you select ON, the controller will then display:
HEAT 06.00
DEMAND 22.00 (default times)
Use the
↑
or
↓
buttons and the Enter button to allocate a start and finish time. Once the
time has been entered, the controller will exit you to the Installer Setup menu.