CESSNA
SECTION 8
MODEL 172S NAV III
AIRPLANE HANDLING, SERVICE
KAP 140 AUTOPILOT
AND MAINTENANCE
U.S.
INTRODUCTION
This section contains factory recommended procedures for proper
ground handling and routine care and servicing of your airplane. It also
identifies certain inspection and maintenance requirements which must
be followed if your airplane is to retain that new airplane performance
and dependability. It is important to follow a planned schedule of
lubrication and preventive maintenance based on climatic and flying
conditions encountered in your local area.
Keep in touch with your local Cessna Authorized Service Facility and
take advantage of their knowledge and experience. Your Cessna
Authorized Service Facility knows your airplane and how to maintain it,
and will remind you when lubrications and oil changes are necessary,
as well as other seasonal and periodic services.
The airplane should be regularly inspected and maintained in
accordance with information found in the airplane maintenance manual
and in company issued service bulletins and service letters. All service
bulletins pertaining to the airplane by serial number should be
accomplished and the airplane should receive repetitive and required
inspections. Cessna does not condone modifications, whether by
Supplemental Type Certificate (STC) or otherwise, unless these
certificates are held and/or approved by Cessna. Other modifications
may void warranties on the airplane since Cessna has no way of
knowing the full effect on the overall airplane. Operation of an airplane
that has been modified may be a risk to the occupants, and operating
procedures and performance data set forth in the POH may no longer
be considered accurate for the modified airplane.
IDENTIFICATION PLATE
All correspondence regarding your airplane should include the Serial
Number. The Serial Number, Model Number, Production Certificate
Number (PC) and Type Certificate Number (TC) can be found on the
Identification Plate, located on the aft left tailcone. The Finish and Trim
Plate, which is installed on the lower part of the left forward doorpost,
contains a code describing the exterior paint combination of the
airplane. The code may be used in conjunction with an applicable
Illustrated Parts Catalog if finish and trim information is needed.
172SPHAUS-05
8-3
For
Training
Purposes
Only
Содержание Cessna 172S NAV III Skyhawk SP
