TEXIO PSF-1200L, Инструкция по эксплуатации

Страница: 92 / 121

83
8-8-6. OUTPUT ON/OFF (
：
OUTP)
This command turns on or off output.
Setting
：
OUTP <value>
Sets the output of a one-output model.
：
OUTP
：
A<value>
Sets the output of CHA.
：
OUTP
：
B<value>
Sets the output of CHB.
The relationship between
<value> and On/Off is as shown below:
1: Output On, 0: Output Off
On the two-output mode, :OUTP selects the OUTPUT key.
Output is activated only after <value> is set to 1.
Application
example
：
OUTP 1
Activates output.
Query
：
OUTP?
Inquires about the output setting of a one-output model.
：
OUTP
：
A?
Inquires about the output setting of CHA.
：
OUTP
：
B?
Inquires about the output setting of CHB.
Response
example 1
Indicates that output is activated.
“?” has the same function as
<value>
Remark This command causes an execution error if output is to be set
externally.
Sending the :OUTP command causes a command error when
both channels of the two-output model are deactivated.
8-8-7. Hi-
Ω
ON/OFF (
：
CONF
：
HIZ)
This command turns on or off the Hi-
Ω
function.
Setting
：
CONF
：
HIZ <value>
<value> is as shown below:
1: Hi-
Ω
On
0: Hi-
Ω
Off
Application
example :CONF:HIZ 1
Activates the Hi-
Ω
function.
Query
：
CONF
：
HIZ?
Inquires about the setting.
Response
example 1
Indicates that the Hi-
Ω
function is working.
“?” has the same
function as <value>.
Remark None