TEXIO PSF-1200L, Инструкция по эксплуатации

Страница: 75 / 121

66
How to Connect Units Horizontally
(1) Remove the rubber shoes from the bottom of unit A. (Keep the
removed rubber shoes and screws with care not to lose them.)
(2) Fix the joint kit (JK-10) to the side with no rubber shoes of the unit B
with the flat countersunk head screws supplied with the kit. (Four
positions)
(3) Place the units as shown in Fig. 6-7 below so that the projections of the
JK-10 on the unit B are inserted in the holes in the unit A, from which
the rubber shoes are removed above.
(4) Shift the unit A, and fix the rear panel to the brackets of the joint kit
(JK-10) firmly with the screw with washer supplied with the kit.
(Two positions)
Unit A
(Viewed from above）
（
Shift and screw
）
Connection for Horizontal Installation
Fix JK-10 with attached
screw at 4 positions
2 positions
Unit A
Unit B
Unit B
Fig.6-7 Connection for Horizontal Installation