TEXIO PSF-1200L, Инструкция по эксплуатации

Страница: 103 / 121

94
8-8-35. Communication reset (
＊
RST)
This command clears the communication status.
Setting
＊
RST
Clears the send buffer, receive buffer, local bus buffer,
command execution buffer, status byte and event register.
Clears the ESE register and SRE register and also clears the
talker and listener setting.
Query None
8-8-36. Command completion (
＊
OPC)
This command notifies of command execution.
Setting
＊
OPC
Bits 0 of the event status registers are set when the command
is executed. SRQ is generated depending on the status of
the ESE register and SRE register.
Query ＊
OPC?
The value
“1” is returned when the command is executed.
8-8-37. Wait for completion (
＊
WAI)
This command waits for command completion.
Setting
＊
WAI
Waits for execution of the following message till completion of
the command:
This unit accepts overlap commands only. Executes no
processing, in particular.
Query None