TEXIO PSF-1200L, Инструкция по эксплуатации

Страница: 48 / 121

39
(2) Press the ENTER / CHECK key to enter the sequence operation setting
mode. Select ON or OFF with the encoder.
(The sequence operation is set to OFF before shipment.)
initial setting Sequence operation activated
(3) Press the ENTER / CHECK key to validate setting.
The LED below the PRESET key goes on.
1 2 3
○ ○ ○
― ●
SEQUENCE
―
(4) Set an intended start step number with the encoder.
Press the ENTER / CHECK key to validate it.
The setting range is from 0 to 99.
Starting sequence operation from step No.
“00”
(5) Then, set an intended end step number with the encoder.
Press the ENTER / CHECK key to validate it.
The setting range is from 0 to 99.
Finishing sequence operation at step No.
“99”