TEXIO LSG-1050H, Инструкция по эксплуатации

Страница: 82 / 205

72
2-6-5. Input / Output Trigger Settings
2-6-5-1. Trigger in Delay
Description The Trig in Delay setting determines how long to delay
any action after a trigger is received.
Default setting 0.0us
Operation
Press Shift >
Utility
Help
> Other [F5] in order,
and set the Trig in Delay setting.
Trig in Delay: 0.0
– 5000us
2-6-5-2. Trigger Out Width
Description The Trigger Out Width setting sets the trigger output
signal’s pulse width.
Default setting 10.0us
Operation
Press Shift >
Utility
Help
> Other [F5] in order,
and set the Trig Out width.
Trig Out width: 2.5
– 5000us
2-6-6. Measure Average
Description The Measure Average setting is used to set the speed of
the measurement display. The setting has three modes.
They are slow, normal and fast
The default mode for Measure Average setting is slow.
Operation
1. Press
Shift
+
Utility
Help
> Other[F5] .
2. Set the Measure Average setting.
Slow
Normal
Fast
Default Average 64 times; Display spend time:1280ms
Average 16 times; Display spend time:320ms
Average 4 times; Display spend time:320ms
Slow mode