TEXIO LSG-1050H, Инструкция по эксплуатации

Страница: 58 / 205

48
Operation 1. Make sure the load is off.
2. Press
Main
.
3. Select Dynamic or Static mode with the Function [F4]
soft-key.
A different switching mode can be set for CC, CR and
CP mode.
4. See page 48 (Static Mode Operation) for Static Mode.
See page 49 (Dynamic Mode Operation) for Dynamic
Mode.
Static Mode
Operation For static mode, select whether A Value or B Value is the
“active” setting, press the
Shift
>
Preset
keys.
The “active” value will be shown in the Operation Status
Panel.
The load can be “on” when switching between A Value
and B Value.
Mode
CP
I Range
H 8.75A
V Range
H 800V
Function
Static
Configure
0.00
V
0.0000
A
0.00
W
CP B Value 0.00
CP A Value 0.00
LOAD RS232
A Value
Fine
01/Oct/2017
W
W
Active setting
A Value
B Value
+CV OFF V
Static mode