TEXIO LSG-1050H, Инструкция по эксплуатации

Страница: 189 / 205

179
7-7. LSG-H Series Specifications
The specifications apply when the LSG-H Series is powered on for at least 30
minutes to warm-
up to a temperature of 20˚C to 30˚C, unless specified
otherwise.
All specifications apply when using the rear panel terminals. If the front panel
terminals are used or if operating with long cables, remote sense must be
connected to the terminals.
In parallel mode: All operation/settings/resolution specifications are N times.
Slew rate maximum value, voltage setting and measured value are not
changed.
The maximum slew rate settings also don’t change.
N = Number of units in parallel (Same model on master)
N = LSG-1050H + 2 x Number of units in parallel (LSG-2100SH)
7-7-1. Rating (Master)
Model
LSG-175H LSG-350H LSG-1050H
Operating Voltage
5V~800V
Current
8.75A 17.5A 52.5A
Power
175W 350W 1050W
7-7-2. Rating (Booster)
Model LSG-2100SH
Operating Voltage
5V~800V
Current
105A
Power
2100W
Current Setting Accuracy
± (1.2% of set + 1.1% of f.s.)
NOTE:M range applies to the full scale of H range