TEXIO LSG-1050H, Инструкция по эксплуатации

Страница: 121 / 205

111
3-4. OCP Test function
Description The OCP test function creates an automatic test to test the
OCP of power supply products.
This test will test to see when the over current protection of a
power supply is tripped and return the measurements for the
voltage and current when the over current protection was
tripped. The LSG-H also has a user-defined cutoff setting in
the event that the power supply OCP fails.
The diagram below shows an example of the OCP Test function:
The test current increases from a starting value (Start C) to an end value
(End C). The current increases in steps (set by Step C) with a set step time
(set by Step
T) until the power supply’s OCP is tripped or the End C current
level is reached.