Texas Instruments SimpleLink CC2652PSIP, Руководство пользователя

Страница: 13 / 68

8.9 RF Frequency Bands
Over operating free-air temperature range (unless otherwise noted).
PARAMETER MIN TYP MAX UNIT
Frequency bands 2360 2500 MHz
8.10 Bluetooth Low Energy - Receive (RX)
Measured on the CC2652xSIP-EM reference design with T
c
= 25 °C, V
DDS
= 3.0 V, f
RF
= 2440 MHz with
DC/DC enabled and high power PA connected to V
DDS
unless otherwise noted.
All measurements are performed at the antenna input with a combined RX and TX path, except for high power PA which is
measured at a dedicated antenna connection. All measurements are performed conducted.
PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
125 kbps (LE Coded)
Receiver sensitivity Differential mode. BER = 10
–3
–103 dBm
Receiver saturation Differential mode. BER = 10
–3
>5 dBm
Frequency error tolerance
Difference between the incoming carrier frequency and
the internally generated carrier frequency
> (–300 / 300) kHz
Data rate error tolerance
Difference between incoming data rate and the internally
generated data rate (37-byte packets)
> (–320 / 240) ppm
Data rate error tolerance
Difference between incoming data rate and the internally
generated data rate (255-byte packets)
> (–100 / 100) ppm
Co-channel rejection
(1)
Wanted signal at –79 dBm, modulated interferer in
channel, BER = 10
–3
–1.5 dB
Selectivity, ±1 MHz
(1)
Wanted signal at –79 dBm, modulated interferer at ±1
MHz, BER = 10
–3
8 / 4.5
(2)
dB
Selectivity, ±2 MHz
(1)
Wanted signal at –79 dBm, modulated interferer at ±2
MHz, BER = 10
–3
44 / 37
(2)
dB
Selectivity, ±3 MHz
(1)
Wanted signal at –79 dBm, modulated interferer at ±3
MHz, BER = 10
–3
46 / 44
(2)
dB
Selectivity, ±4 MHz
(1)
Wanted signal at –79 dBm, modulated interferer at ±4
MHz, BER = 10
–3
44 / 46
(2)
dB
Selectivity, ±6 MHz
(1)
Wanted signal at –79 dBm, modulated interferer at ±6
MHz, BER = 10
–3
48 / 44
(2)
dB
Selectivity, ±7 MHz
Wanted signal at –79 dBm, modulated interferer at ≥ ±7
MHz, BER = 10
–3
51 / 45
(2)
dB
Selectivity, Image frequency
(1)
Wanted signal at –79 dBm, modulated interferer at image
frequency, BER = 10
–3
37 dB
Selectivity, Image frequency ±1
MHz
(1)
Note that Image fre 1 MHz is the Co- channel
–1 MHz. Wanted signal at –79 dBm, modulated interferer
at ±1 MHz from image frequency, BER = 10
–3
4.5 / 44
(2)
dB
500 kbps (LE Coded)
Receiver sensitivity Differential mode. BER = 10
–3
–98 dBm
Receiver saturation Differential mode. BER = 10
–3
> 5 dBm
Frequency error tolerance
Difference between the incoming carrier frequency and
the internally generated carrier frequency
> (–300 / 300) kHz
Data rate error tolerance
Difference between incoming data rate and the internally
generated data rate (37-byte packets)
> (–350 / 350) ppm
Data rate error tolerance
Difference between incoming data rate and the internally
generated data rate (255-byte packets)
> (–150 / 175) ppm
Co-channel rejection
(1)
Wanted signal at –72 dBm, modulated interferer in
channel, BER = 10
–3
–3.5 dB
Selectivity, ±1 MHz
(1)
Wanted signal at –72 dBm, modulated interferer at ±1
MHz, BER = 10
–3
8 / 4
(2)
dB
Selectivity, ±2 MHz
(1)
Wanted signal at –72 dBm, modulated interferer at ±2
MHz, BER = 10
–3
43 / 35
(2)
dB
Selectivity, ±3 MHz
(1)
Wanted signal at –72 dBm, modulated interferer at ±3
MHz, BER = 10
–3
46 / 46
(2)
dB
Selectivity, ±4 MHz
(1)
Wanted signal at –72 dBm, modulated interferer at ±4
MHz, BER = 10
–3
45 / 47
(2)
dB
www.ti.com
CC2652PSIP
SWRS263A – FEBRUARY 2021 – REVISED JUNE 2022
Copyright © 2022 Texas Instruments Incorporated Submit Document Feedback 13
Product Folder Links: CC2652PSIP