Texas Instruments SimpleLink CC2652PSIP, Руководство пользователя

Страница: 18 / 68

8.13 Zigbee and Thread - IEEE 802.15.4-2006 2.4 GHz (OQPSK DSSS1:8, 250 kbps) - TX
Measured on the CC2652xSIP-EM reference design with T
c
= 25 °C, V
DDS
= 3.0 V, f
RF
= 2440 MHz with
DC/DC enabled and high power PA connected to V
DDS
unless otherwise noted.
All measurements are performed at the antenna input with a combined RX and TX path, except for high power PA which is
measured at a dedicated antenna connection. All measurements are performed conducted.
PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
General Parameters
Max output power, high
power PA, 10 dBm
configuration
(1) (2)
Differential mode, delivered to a single-ended 50-Ω load through a balun 10.0 dBm
Output power
programmable range,
high power PA, 10 dBm
configuration
Differential mode, delivered to a single-ended 50-Ω load through a balun 5 dB
Max output power,
regular PA
(3)
Differential mode, delivered to a single-ended 50-Ω load through a balun 5 dBm
Output power
programmable range,
regular PA
Differential mode, delivered to a single-ended 50-Ω load through a balun 26 dB
Spurious emissions and harmonics
Spurious emissions,
high-power PA, 10 dBm
configuration
(1)
f < 1 GHz, outside restricted
bands
+10 dBm setting
< -36 dBm
f < 1 GHz, restricted bands ETSI < -47 dBm
f < 1 GHz, restricted bands FCC < -55 dBm
f > 1 GHz, including harmonics -42 dBm
Harmonics,
high-power PA, 10 dBm
configuration Second harmonic < -42 dBm
Third harmonic < -42 dBm
Spurious emissions,
regular PA
(3)
f < 1 GHz, outside restricted
bands
+5 dBm setting
< -36 dBm
f < 1 GHz, restricted bands ETSI < -47 dBm
f < 1 GHz, restricted bands FCC < -55 dBm
f > 1 GHz, including harmonics < –42 dBm
Harmonics,
regular PA
(3)
Second harmonic < -42 dBm
Third harmonic < -42 dBm
IEEE 802.15.4-2006 2.4 GHz (OQPSK DSSS1:8, 250 kbps)
Error vector magnitude,
high power PA, 10 dBm
configuration
+10 dBm setting 2 %
Error vector magnitude,
Regular PA
+5 dBm setting 2 %
(1) For FCC 15.247 Part 15 (US) Channel 16 is disabled and not available for use.
(2) To meet the ETSI EN 300 328 (Europe) 10dBm/MHz Power Spectral Density (PSD) requirement, output power is limited to 7 dBm and
6 dBm when using a max antenna gain of 1.9 dBi and 3.3 dBi, respectively.
(3) To meet the FCC 15.247 Part 15 (US) Band Edge requirement, Channel 16 is reduced by 3 dBm.
8.14 Timing and Switching Characteristics
8.14.1 Reset Timing
PARAMETER MIN TYP MAX UNIT
nRESET low duration 1 µs
CC2652PSIP
SWRS263A – FEBRUARY 2021 – REVISED JUNE 2022
www.ti.com
18 Submit Document Feedback Copyright © 2022 Texas Instruments Incorporated
Product Folder Links: CC2652PSIP