8.5 Power Consumption - Power Modes
c
= 25 °C, V
DDS
= 3.0 V with DC/DC enabled unless
otherwise noted.
PARAMETER
TEST CONDITIONS
TYP
UNIT
Core Current Consumption
I
core
Reset and Shutdown
Reset. nRESET pin asserted or VDDS below power-on-reset threshold
30
µA
Shutdown. No clocks running, no retention
160
nA
Standby
without cache retention
RTC running, CPU, 80KB RAM and (partial) register retention.
RCOSC_LF
0.99
µA
RTC running, CPU, 80KB RAM and (partial) register retention
XOSC_LF
1.15
µA
Standby
with cache retention
RTC running, CPU, 80KB RAM and (partial) register retention.
RCOSC_LF
3.36
µA
RTC running, CPU, 80KB RAM and (partial) register retention.
XOSC_LF
3.47
µA
Idle
Supply Systems and RAM powered
RCOSC_HF
708
µA
Active
MCU running CoreMark at 48 MHz
RCOSC_HF
3.5
mA
Peripheral Current Consumption
I
peri
Peripheral power
domain
Delta current with domain enabled
102
µA
Serial power domain
Delta current with domain enabled
7.56
RF Core
Delta current with power domain enabled,
clock enabled, RF core idle
221
µDMA
Delta current with clock enabled, module is idle
67.1
Timers
Delta current with clock enabled, module is idle
85.1
I2C
Delta current with clock enabled, module is idle
10.6
I2S
Delta current with clock enabled, module is idle
27.6
SSI
Delta current with clock enabled, module is idle
90.2
UART
Delta current with clock enabled, module is idle
175.9
CRYPTO (AES)
Delta current with clock enabled, module is idle
26.9
PKA
Delta current with clock enabled, module is idle
88.9
TRNG
Delta current with clock enabled, module is idle
37.4
Sensor Controller Engine Consumption
I
SCE
Active mode
24 MHz, infinite loop
808
µA
Low-power mode
2 MHz, infinite loop
30.1
(1)
CC2652xSIP integrates a 100 kΩ pull-up resistor on nRESET
(2)
Only one UART running
(3)
Only one SSI running
(4)
Only one GPTimer running
SWRS263A – FEBRUARY 2021 – REVISED JUNE 2022
Copyright © 2022 Texas Instruments Incorporated
11
Product Folder Links: