c
= 25 °C, V
DDS
= 3.0 V, f
RF
= 2440 MHz with
DC/DC enabled and high power PA connected to V
DDS
unless otherwise noted.
All measurements are performed at the antenna input with a combined RX and TX path, except for high power PA which is
measured at a dedicated antenna connection. All measurements are performed conducted.
PARAMETER
TEST CONDITIONS
MIN
TYP
MAX
UNIT
Co-channel rejection
Wanted signal at –67 dBm, modulated interferer in
channel,BER = 10
–3
–7
dB
Selectivity, ±2 MHz
Wanted signal at –67 dBm, modulated interferer at ±2
MHz, Image frequency is at –2 MHz, BER = 10
–3
dB
Selectivity, ±4 MHz
Wanted signal at –67 dBm, modulated interferer at ±4
MHz, BER = 10
–3
dB
Selectivity, ±6 MHz
Wanted signal at –67 dBm, modulated interferer at ±6
MHz, BER = 10
–3
dB
Selectivity, image frequency
Wanted signal at –67 dBm, modulated interferer at image
frequency, BER = 10
–3
4
dB
Selectivity, image frequency
±2 MHz
Note that Image fre 2 MHz is the Co-channel.
Wanted signal at –67 dBm, modulated interferer at ±2
MHz from image frequency, BER = 10
–3
dB
Out-of-band blocking
30 MHz to 2000 MHz
–16
dBm
Out-of-band blocking
2003 MHz to 2399 MHz
–21
dBm
Out-of-band blocking
2484 MHz to 2997 MHz
–15
dBm
Out-of-band blocking
3000 MHz to 12.75 GHz
–12
dBm
Intermodulation
Wanted signal at 2402 MHz, –64 dBm. Two interferers
at 2408 and 2414 MHz respectively, at the given power
level
–38
dBm
(1)
Numbers given as I/C dB
(2)
X / Y, where X is +N MHz and Y is –N MHz
(3)
Excluding one exception at F
wanted
/ 2, per Bluetooth Specification
(4)
Suitable for systems targeting compliance with worldwide radio-frequency regulations ETSI EN 300 328 and EN 300 440 Class 2
(Europe), FCC CFR47 Part 15 (US), and ARIB STD-T66 (Japan)
SWRS263A – FEBRUARY 2021 – REVISED JUNE 2022
Copyright © 2022 Texas Instruments Incorporated
15
Product Folder Links:
