manualshive.com logo in svg

TESA MH3D, Руководство пользователя

Поделиться
Скачать
TESA MH3D Скачать руководство пользователя страница 13

User's Manual

MH3D

©2004 TESA Switzerland All Rights Reserved.

Page 1-9

1. BASE - Aluminum casting of open web design with three isolation-type

leveling pads.  Its construction supports the granite table and provides
rigidity and stability for accurate machine operation and measurement.

2. GRANITE TABLE - Mounted on ball and locating pin supports, the

table provides a means for locating and clamping parts to be inspected.

3. Y-AXIS RAILS - Mounted to the base, they provide the means of

guiding the bridge in an accurate and straight line along the Y axis.

4. BRIDGE - A movable structure that consists of the left and right legs

along with the X axis rail.  This structure is movable on the rails for Y
axis measurements.  The X axis rail forms the top portion of the unit and
provides the means for guiding the carriage in an accurate and straight
line along the X axis.

5. PROBE LOCKING LEVER - A lever that is used to clamp and release

the probe in the Z-rail probe holder.

6. Z-RAIL - An adjustable, counterbalanced rail that is movable vertically

in the carriage for making Z axis measurements.  The rail houses a
pneumatic counterbalance that is infinitely adjustable for varying probe
weights.  It is also provided with the means for attaching various types of
probes and accessories.

7.  X-Z CARRIAGE - A structure movable on the rail for X axis measure-

ments.  The carriage contains the air bearings for the X rail as well as the
air bearings for the Z rail.

8. COUNTERBALANCE ADJUST KNOB -This knob is used to adjust the

counterbalance cylinder for the varying probe weights.

9. AXIS LOCK SWITCHES - On the MH3D the switches are used to

engage or release the fine adjust mechanism.

10. PROBE - Probes are either hard or touch trigger types and are used to

take measurements on the piece being measured.

11. CONTROL BOX - A VGA monitor with large, easy to read

characters and a choice of languages.  The display provides XYZ
readouts, software menu selections and data input capabilities.

     12. STAND (OPTIONAL) - A support for the machine and air supply.

It  supports the machine at the proper height for operator movements.

Description

Содержание MH3D







































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды