Terex Genie Z-80/60, Руководство оператора

Страница: 64 / 80

Operator's Manual
Fifth Edition • First Printing
Operating Instructions
62 Z
®
-80/60 Part No. 1294418GT
Platform Out of Level (Platform Level > 15
Degrees Fault)
If ground control display shows PLATFORM
LEVEL > 15 DEGREES FAULT and the platform
level controls do not work, the machine will need
to be recovered by trained and authorized
personnel or a qualified service technician.
Generator (if equipped)
To operate the generator, press the generator
button or move the switch. The indicator light will
come on and the engine rpm will automatically be
in turtle symbol mode.
The engine will continue to run the drive functions
and the platform functions will operate.
If the rabbit symbol or the rabbit and foot switch
symbol are selected, the generator will shut off
and the indicator light will go off.
Plug a power tool into the power to platform GFCI
outlet.
To turn off the generator, press the generator
button or move the switch. The indicator light will
turn off.
Drive Speed Select

Machine on incline symbol: Low range
operation for inclines

Machine on level surface symbol: High range
operation for maximum drive speed
Machine Not Level Indicator Light
If the tilt alarm sounds when the
platform is raised, the Machine Not
Level indicator light will come on
and the drive function in one or
both directions will not operate.
Identify the condition of the boom
on the slope as shown below.
Follow the steps to lower the boom
before moving to a firm, level
surface. Do not rotate the boom
while lowering.
If the tilt alarm sounds
with the platform uphill:
1 Lower the primary
boom.
2 Lower the secondary
boom.
3 Retract the primary
boom.
If the tilt alarm sounds with
the platform downhill:
1 Retract the primary
boom.
2 Lower the secondary
boom.
3 Lower the primary
boom.