Terex Genie Z-80/60 Скачать руководство пользователя страница 34 | Manualshive

Страница: 34 / 80

background image

Operator's Manual

Fifth Edition • First Printing

Controls

32

Z

®

-80/60

Part No. 1294418GT

19

Dual axis proportional control handle for drive
and steer functions.
OR
Proportional control handle for drive function
and thumb rocker for steer function.

Move the control handle in the direction
indicated by the blue arrow on the control
panel and the machine will drive forward.
Move the control handle in the direction
indicated by the yellow arrow and the machine
will drive backwards. Move the control handle
in the direction indicated by the blue triangle
and the machine will steer to the left. Move the
control handle in the direction indicated by the
yellow triangle and the machine will steer to
the right.
OR
Move the control handle in the direction
indicated by the blue arrow on the control
panel and the machine will drive forward.
Move the control handle in the direction
indicated by the yellow arrow and the machine
will drive backwards. Press the left side of the
thumb rocker and the machine will steer to the
left. Press the right side of the thumb rocker
and the machine will steer to the right.

20

Steer mode control with indicator lights

Move the switch or push the button to choose
steer mode. The indicator light next to the
current steer mode will be on.

21

Single axis proportional control handle for
secondary boom up/extend and down/retract
function

Move the control handle up and the secondary
boom will raise and then extend. Move the
control handle down and the secondary boom
will retract and then lower.

22

Drive control with indicator lights

Move the switch or push the button to choose
the drive setting. The indicator light next to the
current setting will be on.

23

Single axis proportional control handle for
primary boom extend/retract function

Move the control handle down and the boom
will extend. Move the control handle up and
the boom will retract.

24

Drive enable control with indicator light

Light on indicates that the primary boom has
moved past either circle-end wheel and the
drive function is turned off. To drive, move the
drive enable switch or push the drive enable
button and slowly move the drive control
handle off center.

«
...
32
33
34
35
36
...
»

Содержание Genie Z-80/60

















































































Отзывы:

Нет отзывов

Похожие инструкции для Genie Z-80/60

Бренд: DINGLI Страницы: 71

Бренд: RUTHMANN Страницы: 16

Бренд: Magni Страницы: 106

Бренд: Haulotte Страницы: 166

Бренд: SICE Страницы: 54

Бренд: JLG Страницы: 143

Бренд: Haulotte Group Страницы: 116

Maxiton GTJZ Series

Бренд: Niuli Страницы: 42

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды