Terex Genie Z-80/60, Руководство оператора

Страница: 62 / 80

Operator's Manual
Fifth Edition • First Printing
Operating Instructions
60 Z
®
-80/60 Part No. 1294418GT
Operating Envelope Indicator Lights
The operating envelope indicator lights will come
on to notify the operator that a function has been
interrupted and/or an action is required by the
operator.
Lower Primary Boom indicator
light flashing: Lower the
primary boom until the indicator
light is off.
Machine Not Level indicator
light flashing: The tilt alarm will
be sounding when this light is
flashing. Move the machine to
a firm, level surface.
Platform Not Level indicator
light flashing: The tilt alarm will
be sounding when this light is
flashing. The Platform Level
toggle switch will only work in
the direction that will level the
platform. Level the platform
until the indicator light is off.
Platform Level Recovery
1 Press down the foot switch.
2 Push and hold the platform level recovery
switch up.
3 Move the platform level switch in the desired
direction.
Note: The platform level switch will only work in
the direction that will return the platform to a level
position.
Note: From +/-10 degrees of platform level up to
+/-14.9 degrees the platform can still be recovered
from the ground controls or by using the platform
level recovery toggle switch in the procedure
above. Once the platform level r/-
15 degrees the only way to recover is to use the
Service/Recovery key switch on the side of the
ground controls to activate Recovery Mode.