Terex Genie Z-80/60, Руководство оператора

Страница: 58 / 80

Operator's Manual
Fifth Edition • First Printing
Operating Instructions
56 Z
®
-80/60 Part No. 1294418GT
Emergency Stop
Push in the red Emergency Stop button to the off
position at the ground controls or the platform
controls to stop all machine functions and turn the
engine off.
Repair any function that operates when either red
Emergency Stop button is pushed in.
Selecting and operating the ground controls will
override the platform red Emergency Stop button.
Auxiliary Controls
Use auxiliary power if the primary power source
fails.
1 Turn the key switch to ground or platform
control.
2 Pull out the red Emergency Stop button to the
on position.
3 Press down the foot switch when using the
controls from the platform.
4 Activate the auxiliary controls. Move
and hold the switch or push and
hold the button. Activate each
function control handle, switch or
button.
The drive function will not operate with auxiliary
power.
Operation from Ground
1 Turn the key switch to ground control.
2 Pull out the red Emergency Stop button to the
on position.
3 Gasoline/LPG models: Choose fuel source.
4 Start the engine.
To Position Platform
1 Push and hold a
function enable/speed
select button.
2 Push the appropriate function button according
to the markings on the control panel.
Drive and steer functions are not available from
the ground controls.
Platform Overload Indicator Light
Light flashing indicates the platform is overloaded.
The engine will stop and no functions will operate.
Remove weight from the platform until the light
goes off and then restart the engine.
Note: An alarm will sound at the platform when an
overload condition occurs and will stop sounding
when weight is removed from the platform.