21
4) This device has two output sockets
controlled by Channel 1 and Channel 2 at the
top of the unit. For IF you must use both
channels. For other modes, you may choose to
use one channel with one pair of lead wires, or
both channels with two pairs of lead wires.
Using both channels gives the user the
advantage of stimulating two different areas at
the same time.
Caution
Do not insert the plug of the patient lead wire into any AC power supply socket.
4.4 Electrodes
4.4.1 Electrode options
The electrodes are disposable and should be routinely replaced when they start to lose
their adhesive nature. If your electrodes stop sticking properly, order replacement
electrodes. To maintain optimal stimulation and to prevent skin irritation, follow the
application procedures outlined in the electrode packing,
4.2 Place electrodes on skin
Apply electrodes to the exact site indicated by your physician or therapist. Before
applying electrodes be sure the skin surface is thoroughly cleaned and dried. Make sure
the electrodes are pressed firmly to the skin and that there is good contact between the
skin and the electrodes.
