31
6.3 electrodes
Reusable.Selt-adherina Electrodes
To use
these electrodes:
l) Attach the electrode to the lead wire.
2) Remove the protective backing from the electrode surface. Do not throw away the
protective backing because it is reused after the treatment session has been completed.
3) Place the tacky surface to the prescribed skin area by pressing the electrode firmly
against the skin.
To removeyour electrodes
I) Lift the corner of the electrode and gently remove it from the skin.
2) Apply the protective backing to the tacky side of the electrode.
3) Place the electrode on the side of
the protective backing that is labeled with the word
on.
4) Store the electrodes in the resealable pouch or a plastic bag.
Caution:
1)
Do not pull on the electrode wire. Doing so may damage the wire and electrode.
2) Do not apply to broken skin.
3) The electrodes should be discarded when they are no longer adhering.
4) The electrodes are intended for single patient use only.
5) If irritation occurs, discontinue use and consult your clinician.
6) Read the instructions for use of self-adhesive electrodes before application.
7) Always use electrodes which meet CE requirements: IEC/EN60601-1, IS010993-
1-5-10 and lEC/EN6O601-1-2, or are legally marketed in the US under 510(K)
procedure.
Connector for inserting
Lead Wire pin
Adhesive pad
