26
9)
Set Relaxation (OFF) time
The OFF Time controls the duration of the relaxation interval. The relaxation
time can be adjusted. Press [S] button cycle to enter this menu, and then press
the [
▲] and [▼] buttons to adjust the setting. Both channels’ stimulation is
cycled on and off by the contraction and relaxation settings. The range is
adjustable from 0 to 60 seconds.
In Alternate program, the OFF Time should equal, or be more than, the ON
Time. (OFF TIME>ON TIME)
4.7.3 IF Setting
Press the [S] button to enter the setting state. Pressing the [S] button repeatedly cycles
through the available options.
The settings can be adjusted according to the following steps:
1) Set the Therapeutic Proqram
There are 4 programs in IF therapeutic mode available.
The therapeutic program can be selected by pressing the [
▲] and [▼] button.
The mode you selected will show up on the top of liquid crystal display.
2) Set Timer
Press [S] button cycle to enter this setting. The treatment time is adjustable
from 1 to 60 minutes or Continue. Press [
▲] or [▼] control to adjust setting. To
select Continuous, when the display shows 60 minutes press [▲] button.
Stimulation output will be shut off when time is up.
3) Set Interference frequency (optional)
Channel 1 has 4000 Hz fixed Fundamental Frequency.
Channel 2 has selectable frequency from 4001 to 4150 Hz:
Interference frequency is adjustable from 1 Hz to 150Hz.
Only “P4” has this parameter setting.
Press [S] button cycle to enter this menu, and then press the [
▲] and [▼]
button to adjusting the setting.