28
5) Set Cycle Time (Optional)
Cycle time is adjustable from 5 to 30 seconds. Only modulation mode has this
parameter setting. Press [S] button cycle to enter this menu and then press [
▲]
or [
▼] button to adjust the setting.
4.8 Adjusting Channel Intensity
Press the intensity control [
▲] or [▼] button to control the intensity output. Slowly press
the intensity button control until you reach the setting recommended by your physician
or therapist. Repeat for the other channel, if both channels are to be used.
Caution:
1) If the stimulation levels are uncomfortable or become uncomfortable, reduce
the stimulation intensity to a comfortable level and contact your medical
practitioner if problems persist.
2) In TENS, EMS and IF therapeutic mode, if the electrodes are not placed firmly
on skin or the device has not been connected to the electrodes, when the output
intensity is set to more than 12mA, the intensity will automatically reset to zero.
4.9 Safety Lock Feature
The Safety Lock Feature automatically activates after there is no operation in the panel
for 30 seconds by locking out the ability to press the buttons. This is a safety feature to
prevent accidental changes to your settings and to prevent accidental increases to the
intensity levels. To unlock the panel, press either one of the [
▼] buttons.
4.10 Stop the treatment
When you have activated the treatment timer, you can press the [M] button or the [
▼]
button to stop the treatment.
Caution:
If the control panel is locked, you must press one of the [
▼] buttons to unlock,
and then press the [M] button or the [
▼] button to stop the treatment.
4.11 Turn OFF
Press [
] button and hold for approx 3 seconds to turn OFF the device.
