Telpar MTP-1500, Руководство пользователя

Страница: 46 / 64

Page 46 of 64
7 D5 D5 I/O ASCII data bit 5
8 D6 D6 I/O ASCII data bit 6
9 D7 D7 I/O ASCII data bit 7
10 /ACK PtrClk O Active low pulse when data is
accepted
11 BUSY PtrBusy O High level when printer cannot
accept data.
12 PE AckDataReq O High level when printer is out of
paper
13 SLCT Xflag O
14 /AFXT HostBusy I .
15 n/c ND -
16 GND GND I Logic ground.
17 Fgnd FG - .
18 Logic-H Logic-H O
19 thru
30 GND GND - Logic ground.
31 /INIT /INIT I
32 /ERROR /DataAvail O
33 GND ND -
34 DKSTAT ND O
35 +5V ND O
36 /SLCTIN 1284-Active I
Table 24 - Parallel Interface Pin Assignments
5 Specifications
5.1 Features
The MTP-1500 series uses an ultra high-speed line thermal printer driven by 24 VDC, printing on 80 mm (3.15 in) or
82.5 mm (3.25 in) width paper.
·
This printer is suitable for variety of application, such as POS terminals, ticket machines, coupon machines,
label printers, medical instruments, and so on.
·
High speed printing : It can print at 150 mm/s (1200 dot line/s) max. Low power consumption: the peak current
for head drive is only 14 A (at 150 mm/s printing speed).
·
Paper auto loading function : Thermal paper can be set without head-up lever operation by auto loading.
·
ESC/POS® *¹ Commands: These commands conform to ESC/POS™, which is a standard in the distribution
industry.
·
Auto Cutter : Printer with auto cutter (full cut/partial cut versions) is standard.
5.2 General Specific++ redo
General Specifications
Specifications MTP-1530 MTP-1532 . .
Printing method Thermal-sensitive line dot method
Dot Structure 576 dots/line 640 dots/line
Dot pitch (horizontal) 0.125 mm (8 dot/mm)-Dot density
Dot pitch (vertical) 0.125 mm (8 dot/mm)-Line feed pitch
Effective printing area 72 mm 80 mm
Paper width 79.5 +/- 0.5 mm 82.5 +/- 0.5
mm
Paper thickness 56~150 µm (0.0022 – 0.0059”)