Telpar MTP-1500, Руководство пользователя

Страница: 28 / 64

Page 28 of 64
C 1 or GS C ;, it is forced to convert
to the maximum value set by GS c.
Select count
mode (B) GS C ; s1 ; s2
; s3 ; s4 ; s5 ; 1D 43 3B s1
3B s2 3B s3
3B s4 3B s5 s1 through s5 are all character
strings made up of the ASCII
characters 0 through 9. s1 and s2
range from 0 to 65535 and s3
through s5 range from 0 to 255. s1
and s2 specify the counter range.
s3 = the amount to increment the
count by. S4 = the repetition
number when the counter value is
fixed. s5 = the counter value.
Count-up mode is selected by s1 <
s2 and s3 and s4 are not =0. .
Count-down mode is selected by s1
> s2 and s3 and s4 are not =0.
Counting stops when s1 = s2 or s3
= 0 or s4 = 0.
Print counter GS c 1D 63 Sets the serial counter value in the
print buffer and increments or
decrements the counter value
based on the count mode selected
by GS C 0 and either GS C 1 or GS
C ;. In count up mode the counter
value is set to the minimum value if
it goes out of the range set by GS C
1 or GS C ;. In count down mode
the counter value is set to the
maximum value if it goes out of the
range set by GS C 1 or GS C ;.
Figure 8 Counter Commands