Telpar MTP-1500, Руководство пользователя

Страница: 30 / 64

Page 30 of 64
received. See FF, CAN, ESC FF,
ESC S, ESC T, ESC W, GS$, GS \.
Select
standard
mode ESC S 1B 53 Data buffered in page mode is
cleared. The printing area set by
ESC W is initialized. Settings of
ESC SP, ESC 2, ESC 3 are
switched to the standard mode
values. See FF, ESC FF, ESC L.
Select print
direction ESC T +n 1B 54 +n Sets the position where data is
buffered within the printing area set
by ESC W. n=0 (either 00 hex or 30
hex) sets the starting position to the
upper left corner and printing goes
from left to right. n=1 (either 01 hex
or 31 hex) sets the starting position
to the lower left corner and printing
goes from bottom to top. n=2
(either 02 hex or 32 hex) sets the
starting position to the lower right
corner and printing goes from right
to left. n=3 (either 03 hex or 33 hex)
sets the starting position to the
upper right corner and printing goes
from top to bottom.
In page
mode, set
printing area ESC W +x1
+x2 +y1 +y2
+dx1 +dx2
+dy1 +dy2 1B 57 +x1 +x2
+y1 +y2 +dx1
+dx2 +dy1
+dy2 x1+x2*256 = horizontal starting
position. y1+y2*256 = vertical
starting position. dx1+dx2*256 =
printing area width. dy1+dy2*256 =
printing area height Defaults are
x1=x2=y1=y2=0, dx1=128 for 82.5
mm printer or 64 for 80 mm printer,
dx2=2, dy1=152 for 82.5 mm printer
or 226 for 80 mm printer, dy2=2.
Set relative
print position ESC \ +n +m 1B 5C +n +m Set printing position to current
position plus (n+m*256)*0.125 mm.
If the starting position is set (by
ESC T) to the upper left or lower
right of the printing area then the
offset is in the horizontal direction
but if the starting position is set to
the upper right or lower left of the
printing area then the offset is in the
vertical direction.
Page mode,
Set absolute
vertical print
position GS $ +n +m 1D 24 +n +m Sets the absolute vertical starting
position to buffer character data to
(n+m*256)*0.125 mm referenced to
the starting
posotopn defined by
ESC T. If the starting position is set
(by ESC T) to the upper left or lower
right of the printing area then the
position is in the vertical direction
but if the starting position is set to
the upper right or lower left of the
printing area then the position is in
the horizontal direction.
Page mode,
set relative
vertical print
position GS \ +n +m 1D 5C +n +m Set printing position to current
position plus (n+m*256)*0.125 mm
positive (down the page) or 65536-
(n+m*256)*0.125 mm negative (up