Telpar MTP-1500, Руководство пользователя

Страница: 33 / 64

Page 33 of 64
command will readjust the margins
as required to print as much of the
data as possible for the printer
mechanism being used. In Page
mode, the terms horizontal and
vertical depend on the print starting
position defined by ESC T.
Table 12 – NV Memory Commands
***+++ Add drawing showing data structure for both download bit image and NV bit image. (Rick)
4.3.8 Seldom Used Commands
Seldom Used Commands
Name Command
ASCII
Command
+n = data
byte[hex]
Description
Set/cancel
user-defined
character set ESC % +n 1B 25 n LSB of n = 0 (default) selects ROM
character generator. LSB of n = 1
selects User Defined character
generator. See ESC & and ESC ?.
Define User-
defined
characters ESC & +y +c1
+c2 (+x +data) 1B 26 03 +c1
+c2 (data) +y specifies 3 bytes per character in
the vertical direction. +c1 specifies
the first character to be downloaded
and +c2 specifies the last character
to be downloaded. +x specifies the
number of dots in the horizontal
direction. The value of +x is 12dec
for FontA or 09dec for FontB ).
FontA or FontB are selected by
ESC ! or ESC M. A download bit
image (GS *) and user defined
characters (ESC &) can not be
defined simultaneously, defining
either will cancel the other.
See
ESC %, ESC ?, +++ add dwg &
bookmark. (Rick)
Cancel user-
defined
characters ESC ? +n 1B 3F +n The previous user defined character
pattern for chan (20 hex
through 7E hex in either font
selected by ESC !) is cleared and
the internal character generator is
used to print the character n. See
ESC & and ESC %.
User-defined
commands GS ( E +p1
+p2 +m (data) 1D 28 45 +p1
+p2 +m (data) p1+p2*256 = the number of data
bytes to m plus 1.
Function 1 enters the user defined
mode. +m=01 hex, p1=03 hex,
p2=00 hex, d1=49 hex, d2=4E hex.
The printer transmits 37 hex 20 hex,
00 hex.
Function 2 ends the user defined
mode. +m=02 hex, p1=04 hex,
p2=00 hex, d1=4F hex, d2=55 hex,
d3=54 hex. The printer performs a
software reset, m=2 is only effective